Introducing Cure It ONE
Cure It ONE is the latest innovative product from Cure It - a true, single-coat flat roofing system specially designed to allow for the complete installation of a roof in one single session!
This fantastic one coat GRP roofing solution is a single-application basecoat with absolutely no need for any additional layer of topcoat.
Cure It ONE can be installed over OSB, felt, asphalt and GRP, and even to concrete with the use of a primer. If your customer is looking for a high-quality solution for warm roofs, kitchen or home extensions, roof details or office extensions - Cure It ONE is a fantastic choice.
The Cure It ONE range includes Cure It ONE roofing resin, hardener, accelerator/inhibitor, roller and roller sleeves, roof washers, and A, B and D roof trims.
This advanced, new-age roofing system is designed to be completed all in one day, so you can get your projects sorted quickly and efficiently while still providing high-quality and long-lasting results.
Shop the Cure It Range
Key Features & Benefits of Cure It ONE
- One-Coat Application: Cure It ONE is a single-coat system that doesn't require a topcoat, saving you time and money on the jobsite. It takes half the amount of time to apply when compared to traditional GRP roof installations - less than 2 minutes to install 1m²!
- No Primer Needed: Cure It ONE can be applied to a vast range of materials without the need for a primer, including OSB, asphalt, felt and GRP. You will need to use a primer if applying Cure It ONE to concrete.
- Streamlined Process: Installation is efficient and straightforward, with less steps to take, less time waiting in between coats, and no topcoat needed.
- Warm Roof Solution: For warm roof specifications made easy, use Cure It ONE washers to fix down the insulation boards and apply Cure It ONE directly to the insulation - no need for a primer!
- Cost-Effective: The Cure It ONE system requires much less time, tools, money and labour to complete compared to traditional GRP application.
- Four-Season Capability: Cure It ONE is specially designed to be installed all year-round, in hot summers or cold winter installations.
How to Install Cure It ONE
Cure It ONE can be used on:
- OSB
- Felt
- Asphalt
- PIR Insulation
- GRP (Glass Reinforced Plastic)
Step One: Preparation & Installing Edge Trims: Refer to the Cure It Guidelines for installation of the trims needed for roof edges and details. Prepare the bandage for trim joins, corners or where they meet decking. Measure, cut and prepare the Cure It Reinforcement Mat for the roof deck (making sure to overlap by 50mm on the feathered edge).
Step Two: Bandage Wet-Out, Coating Trims & Detail Work: Add Cure It ONE hardener packs (available in 6kg and 18kg pails) to the Cure It ONE tin and mix thoroughly. Using a 3" roller, apply Cure It ONE to the area where any trims/decking meet covering fixings, then apply the bandage and add more Cure It ONE. Coat the trims.
Step Three: Laminating & Finishing Touches
Using your Cure It ONE roller, apply Cure It ONE in one 1m² section at a time and cover with Reinforcement Mat. Apply more Cure It ONE on top of the mat, and repeat the process - a wash coat can be applied to complete the roof.
For more information on the features and benefits of Cure It ONE as well as a step-by-step installation guide, you can view the Cure It ONE Installation Manual.
Plus, you can view the handy video installation guide put together by Cure It below:
Video Guide
FAQs
Cure It recommends attending a Cure It training course before using their products. You can learn how to install a Cure It GRP roof, and use the product range with hands-on practical training delivered by an experienced Cure It installer, during regular training courses at their training centre at Head Office in Wigan and branch training at stockists across the UK.
Cure It is one of the leading GRP flat roofing systems in the UK - a wet-laid system applied to OSB3 T&G decking consisting of roofing resin and a topcoat. Cure It ONE is a single-coat GRP roofing system that can be completed within one day and doesn't require a topcoat.